DBSTalk Forum banner
1 - 10 of 10 Posts

· New Member
Joined
·
3 Posts
Discussion Starter · #1 ·
Long time DTV subscriber until a little over a year ago and used whole Home via Ethernet that worked quite well. As I'm going through some recent threads it seems that the Ethernet option is no longer supported and I should instead expect the installer to connect me via DECA when he arrives this Friday.

Is this a correct observation? If so, can someone explain why Directv went to DECA as a standard and will I be happy with the performance of this configuration as opposed to Ethernet which worked just fine before?

Thanks
 

· Hall Of Fame
Joined
·
8,058 Posts
Ether said:
Long time DTV subscriber until a little over a year ago and used whole Home via Ethernet that worked quite well. As I'm going through some recent threads it seems that the Ethernet option is no longer supported and I should instead expect the installer to connect me via DECA when he arrives this Friday.

Is this a correct observation? If so, can someone explain why Directv went to DECA as a standard and will I be happy with the performance of this configuration as opposed to Ethernet which worked just fine before?

Thanks
WH over ethernet is still an option, though officially "unsupported." If you order DIRECTV with WHDVR service the technician will install your receivers and network them through DECA then activate WHDVR service.

If you order DIRECTV without WHDVR, then the tech. will install the receivers without DECA networking and leave it to you as an option to later connect them through ethernet then call and activate WH service in unsupported status.
 

· Hall Of Fame
Joined
·
3,585 Posts
As far as your other question goes DirecTV went with DECA because it is easier for them. The techs are already trained on how to run/terminate RG6 coax cable, using DECA they don't have to worry about teaching them how to run/terminate Cat5/6 cables. It also makes the system much easier for them to troubleshoot as they just make sure the DECA system is running correctly, they don't have to try to troubleshoot and train people for all the different ethernet network devices and setups that different people may have in their homes.
 

· New Member
Joined
·
3 Posts
Discussion Starter · #4 ·
Thanks guys. The ease of installation and standardizing on a system they can control makes sense. My dish and wiring are still in place so I don't anticipate much difficulty with the install. I'll let the installer do his thing and see if DECA performs to my expectation.
 

· 1*
Joined
·
9,917 Posts
"Ether" said:
Thanks guys. The ease of installation and standardizing on a system they can control makes sense. My dish and wiring are still in place so I don't anticipate much difficulty with the install. I'll let the installer do his thing and see if DECA performs to my expectation.
DECA should perform as good or better than using your home network for Whole Home. The idea of the Whole Home being in its own little cloud keeps normal network traffic from interfering with it.

- Merg
 

· Icon
Joined
·
1,780 Posts
HoTat2 said:
WH over ethernet is still an option, though officially "unsupported." If you order DIRECTV with WHDVR service the technician will install your receivers and network them through DECA then activate WHDVR service.

If you order DIRECTV without WHDVR, then the tech. will install the receivers without DECA networking and leave it to you as an option to later connect them through ethernet then call and activate WH service in unsupported status.
All installs now include deca even if whole home is not ordered. There is a line item on the work "mrv enabled" when that line is closed that flags the account as ready to go mrv at just a flip of the switch. If the tech didnt install the equipment needed and the customer calls to add mrv, then it doesnt work they open a service call.
 

· Hall Of Fame
Joined
·
8,058 Posts
west99999 said:
All installs now include deca even if whole home is not ordered. There is a line item on the work "mrv enabled" when that line is closed that flags the account as ready to go mrv at just a flip of the switch. If the tech didnt install the equipment needed and the customer calls to add mrv, then it doesnt work they open a service call.
Thanks for the correction;

Guess I should have surmised as much, particularly given that most new installs nowadays are likely the HR24, H25, and HR34 anyway which all have internal DECAs.

So beyond maybe installing a CCK, its not like its any real additional labor or potentially wasted DECA gear involved in most cases to make them all WH ready without actual MRV activation ... :)
 

· Premium Member
Joined
·
41,526 Posts
HoTat2 said:
Thanks for the correction;

Guess I should have surmised as much, particularly given that most new installs nowadays are likely the HR24, H25, and HR34 anyway which all have internal DECAs.

So beyond maybe installing a CCK, its not like its any real additional labor or potentially wasted DECA gear involved in most cases to make them all WH ready without actual MRV activation ... :)
I think this may be due to the change to ARS, that combines the HD, DVR, MRV fees.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top