DBSTalk Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Icon
Joined
·
545 Posts
farjo08 said:
Today we had some snow and I lost signal on all my receivers (HR20, HR10-250 and SAT-T60). I cleaned the dish / LNB(s) and the HR10-250 and SAT-T60 work fine. But after several resets of the HR20 I still get Searching For Satellite on Tuner 1 and onyl get about a dozen channels. All my guide data is blank (doesn't it store this information) and all of my to do's are deleted.

As the other receivers are working fine, why would the HR20 not be able to acquire a signal? Checking signal strengh most show between 85 - 95 so it's getting the signal so I have no idea what the problem is.

A call to DTV will happen shortly but wanted to check to see if anyone here had any ideas as well.
1st try removing B-Band Converters and connect coax directly to HR20!
If that doesn't work, try swapping SAT1-IN with SAT2-IN.
Report back your results!
 

·
Icon
Joined
·
545 Posts
The "BBC's" serve no purpose at the present time, however they will be needed some time next year when D* launches new sats. Right now, they are kind of flakey, see a lot of failures with them and some partial failures. I have one that works fine with my H20 but not at all with HR20!
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top