DBSTalk Forum banner

Terminator drop outs low sound volume 9/8

754 Views 8 Replies 9 Participants Last post by  Dmitry
Did any one else have dropouts pixelation and low sound volume on the Terminator: the Sarah Conner Chronicles tonight 9/8?

HR 20-100
1 - 9 of 9 Posts
I had the same problem, and considering we live in the same area, I wonder if it's a Ch. 40 reception issue, if no one else saw them on their locals. Had 3 or 4 in the first oh, third of the show, then the middle section was clear, then had 1 or 2 in the last third.

Then again, the reception on my receiver is lower than I'd like on some of the sats, wish the installer hadn't decide to move the switch, while it's probably in a more correct location, out of the weather, he cut the line to move it and I noticed my numbers aren't as high as they used to be, so I get dropouts once in a while on some channels, never know how much it's the channels themselves, and how much the reception.

Had a number of glitches and weird audio here and there when watching the Olympics on KCRA.
im in florida and i noticed that my fox channel has lower audio than the rest of the locals here. i had a little pixilation in the beginning but nothing to severe. im using a hr21-100
Same problem in central pa very low volume. Very little pixilation in the beginning not bad at all.
I didn't notice the pixelation but the low sound volume was very annoying. Of course the sound volume was plenty loud enough during commercials. Luckily I was able to skip most of those...

John in Cal said:
Did any one else have dropouts pixelation and low sound volume on the Terminator: the Sarah Conner Chronicles tonight 9/8?

HR 20-100
No dropouts here but definitely low volume - but I'm getting my signal OTA so it's gotta be a FOX thing.
Ditto in Minnesota. I saw it on DTV and the OTA channel too.
My receiver just recorded an hour of a blank screen with no audio :(
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top