I have replaced my RG-6 cable from my CM4228 with RG11. I recorded signal strength before and after switching and have noticed a increase in signal strength of 3-6 pts. WRAZ50 was not locking with the RG6,but has no dropouts so far using RG11 although the signal is hovering at 60-64. I plan to monitor this a few hrs then swap back to the RG6 and see if I am able to keep WRAZ locked then. Having trouble receiving a solid FOX signal is reason for the testing,so also plan to do some test with FOX 8/14 and Fox 26. Both 26 and 50 are over 60 miles away while 14 is closer,but is not very strong. I normally am unable to get WRAZ50 during the daytime and wasn't receiving it today before switching. I also normally suffer dropouts on it even when getting a signal of 65-70. I hoping the RG11 is improving my signal loss just enough to stop the dropouts. I will keep results posted.