[gmoney]

I have the 101 and 119 signals maxed out but I have nothing on the 110? Do I have an elivation, tilt or azimuth issue? This is for D*TV, could something be wrong with my lnb?

 

[Earl Bonovich]

I have the 101 and 119 signals maxed out but I have nothing on the 110? Do I have an elivation, tilt or azimuth issue? This is for D*TV, could something be wrong with my lnb?

Yes.. If you have both the 101 and 119 peeked, you should get the signal on the 110

 

[gmoney]

Yes.. If you have both the 101 and 119 peeked, you should get the signal on the 110

ok so if my lnb is shot what programing am I missing without the 110? I looked in the program guide and I don't seem to be absent any channels?

I put this back up after giving up on installing my slimline/AT9 dish. I can't figure out how to get this slimline going for the life of me. I peaked one signal but I that was teh 110. For some reason the 101 is elusive, the highest reading I received in that direction on the meter was 74. I'm using the accutrac 22 pro and having a bear of a time with it. So I popped the 3 lnb back on there in the mean time and peaked it in 2 seconds????

Any tips would be appreciated and if you could tell me what channels I loose from the 110 I would appreciate it. (sort of dropped the 3 lnb off the roof......smart) That is why I figured I killed the 110 spot.

 

[bwaldron]

ok so if my lnb is shot what programing am I missing without the 110? I looked in the program guide and I don't seem to be absent any channels?

Most (not all) of the HD programming comes from 110:

http://www.lyngsat.com/packages/directvusa110.html

You'll still see the channels from 110 in the guide, but you won't be able to watch them if you're not getting signal from that bird.

I agree with Earl, if you're getting strong signals from 101 and 119, it's not a dish alignment issue...sounds like a bad LNB.

 

[paulman182]

Make sure you are checking a live transponder on 110, because I think only a few have signal.

 

[cybrsurfer]

I have the 101 and 119 signals maxed out but I have nothing on the 110? Do I have an elivation, tilt or azimuth issue? This is for D*TV, could something be wrong with my lnb?

DirecTV doesn't require customers to do self installs. Especially on larger dishes like the series III and AT-9/Slimline. If your finding it to difficult by DIY, then call DirecTV to do it for you or peak/align it. I'm sure they appreciate the work you have done so far, and it won't take long to complete. Who knows maybe you can learn some tips from the installer for future reference.