DBSTalk Forum banner
1 - 8 of 8 Posts

· AllStar
Joined
·
57 Posts
Discussion Starter · #1 ·
I have an HR20 installed in my lv room. However I am unable to record a show and watch live T.V. on another channel/record two shows at once in the lv room. Thus I am missing some of my recordings, etc.


I have checked all connections and they seem to be in tact. Tuner two is weak on all sats. Could this be an alignment issue?? If so why am I receiving such high readings on tuner 1?????

Here are my numbers on both recivers from the lv room connection:

101

Tuner 1:

1-8 97 96 97 95 97 100 98 100
9-16 98 98 98 87 99 100 98 100
17-24 98 77 98 95 98 200 98 200
25-32 97 0 97 43 97 100 97 100

Tuner 2:

1-8 0 0 0 0 0 0 0 0
9-16 0 63 0 61 0 77 0 73
17-24 0 0 0 72 0 83 0 88
25-32 0 0 0 20 0 93 95

* The readings are similar on the other sat.

TIA, iamcasacnu
 

· The Shadow Knows!
Joined
·
36,634 Posts
Now, it sounds like you have a bad cable or bad BBC. If you swap the cables or BBCs, do the numbers swap also?
 

· Icon
Joined
·
818 Posts
Does a restart fix it?

I have an HR20-700 that has a fairly consistent problem with tuner 1 losing all transponders after rain fade. A restart consistently fixes it, leading me to believe that it's software and not hardware.
 

· AllStar
Joined
·
57 Posts
Discussion Starter · #6 ·
Try swapping the cables on the rear of your receiver and see if the low readings stay with tuner 2 or move to tuner 1.
O.K. Now I am realllly confused. I swapped the cables (without disconnecting the bbc's and now my readings look like this:

101

Tuner 1:

1-8 97 96 97 95 97 100 98 100
9-16 98 98 98 87 99 100 98 100
17-24 98 77 98 95 98 100 98 100
25-32 97 0 97 43 97 100 97 100

*Tuner 2:

1-8 97 96 97 95 96 100 98 100
9-16 98 98 98 87 96 100 98 100
17-24 98 81 98 95 98 100 97 100
25-32 97 0 97 43 97 100 98 100

Still cannot record and watch live tv. Repeated sat. setup, same respons. Hard reset the reciever. Same response.

This is not making sense now!! Help! Thanks guys!!
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top