DBSTalk Forum banner

ViP622/ViP722 - L6.10 Software Experiences/Bugs Discussion

20247 Views 102 Replies 54 Participants Last post by  tnsprin
It looks like L6.10 has started to spool to some ViP722 customers. Please use this thread for discussing your experiences and bugs with this release.

Release notes can be found here. - Sorry for the delay on this I was on vacation.
1 - 20 of 103 Posts
This is the software to enable the 1080p content?
My system has been "Turbo Charged." It says so on the standby screensaver. So I tried out the "Movies On Demand" feature menu. Of course it gives me an error message right after it brings up the listings indicating my "smart card" hasn't been authorized, which never occurred before 6.10. However, I'm using component connections, so it might not be an error but rather it knows I don't have HDMI and therefore the digitial rights management (DRM) system built into HDMI. I'll have to wait until others some with component and some with HDMI test their systems.

I noticed a few menu changes and I actually have 1 DishONLINE tv show option, an Olympics associated freebee.
Under HDTV setup what options are availabe? 1080p? Native?
sampatterson said:
Under HDTV setup what options are availabe? 1080p? Native?
They haven't changed as near as I can tell. I don't get a 1080p or native option. But then I only have component, so I'll be curious to see if anyone with HDMI gets different results.
I "chatted" on line with Tech Support explaining the problem I was having with the "Movies on Demand" smart card error with the following results:
TSR: I am very sorry you are having this issue. We are aware of the problem as we are adding some special content to the vod service, and the issue will be resolved by tommorrow.
Me: OK. Thanks.
TSR: Is there anything else I can assist you with?
Me: Not today.
TSR: Thank you for using Dish Network Live Chat, have a great day.
So, we'll see.:shrug:
Rob Glasser said:
It looks like L6.10 has started to spool to some ViP722 customers. Please use this thread for discussing your experiences and bugs with this release.

Release notes will be posted as soon as I get them.
Hi i still have L 512 for 722 is thata new version
Based on Marks post in another thread, L6.10 has been pushed to a subset of 722 users. So the versions you can be on is either L5.12 or L6.10. Both are valid in the field for 722 users.
Is this update only going out to 722's? And is it really the 1080p promised in their press release:

DISH Network(R) Unveils Biggest High Definition Upgrade in TV History

Includes Industry's First High Definition Programming Offered in 1080p and Up To 150 National HD Channels

ENGLEWOOD, Colo., July 31, 2008 /PRNewswire-FirstCall via COMTEX News Network/ -- DISH Network Corporation (Nasdaq: DISH) today set the bar for the next-generation HD standard by becoming the first in the industry to offer high definition programming in 1080p, the highest and best HD resolution available.

This new functionality is part of DISH Network's latest and unprecedented expansion in high definition services, which includes the rollout of TurboHD, the industry's first 100 percent, all-HD suite of programming packages. As previously announced, DISH Network will also launch 17 new national HD channels tomorrow, surpassing its goal of reaching 100 national HD channels five months ahead of schedule. DISH Network now offers up to 114 national HD channels and plans to expand that line-up to 150 channels by the end of 2008, made possible by the recent launch of Echo XI, the most powerful satellite in the company's fleet.

"Over the years, DISH Network has maintained a very competitive high definition offering in the marketplace, providing customers with a premium HD product including the best technology, signal and experience -- at the best value -- that no other pay-TV provider can come close to matching. Our latest system upgrade coupled with the introduction of TurboHD further strengthens our position as the leader in digital television and high definition television," said Charlie Ergen, Chairman, CEO and President of DISH Network. "We know that once consumers start watching their favorite TV shows in high definition, their viewing habits change and their preference switches to all-HD programming. Only DISH Network gives them that option, all for an industry-low price of $24.99 per month."

DISH Network's new high definition services are supported by a proprietary system upgrade that, starting August 1, is being rolled out to all MPEG-4 HD DVR receivers. The upgrade activates a unique feature of the set-top boxes, improving the current standard of HD delivery used by pay-TV providers such as the ability to output 1080p programming. By early August, all DISH Network customers with MPEG-4 HD DVR receivers will have the only set-top boxes in the nation enabled to display 1080p content, allowing them to maximize the full potential of their 1080p-compatible HDTV sets.

To celebrate this new era in the high definition viewing experience, DISH Network is offering subscribers a special deal in August to enjoy the unparalleled picture and sound of 1080p high definition programming. Starting August 1, Warner Bros. Pictures' blockbuster "I Am Legend" starring Will Smith will be available in 1080p resolution -- same as Blu-ray(R) Disc quality -- on DISH Network's VOD service, DISH On Demand, at a discounted price. Subscribers with MPEG-4 HD DVRs may order the movie on DISH Network Channel 501.
See less See more
barryaz1 said:
Is this update only going out to 722's? And is it really the 1080p promised in their press release
According to channel 75 this morning, the "turbo charge" is for ViP612, 622 and 722. The 1080p is only for some VOD offerings.
It is currently in limited roll out for 722s only. I can't attest to 1080p because my TV does not support it.
I'm still getting the glitch I reported above on the "Movies on Demand".
Why would Dish advertise:

"All DISH Network HD customers have been Turbo-charged! In the early morning hours of 8/1 DISH Network reinvented high definition! Current HD customers had the next generation of HD downloaded right to their receivers!"

I am still at L5.12. Why would they say this if it's limited distribution?
I would like to test out the 1080P

Rick
It is the usual disconnect between marketing and reality ... but that is a topic for another forum - this forum is technical about the receivers.
Rob Glasser said:
It looks like L6.10 has started to spool to some ViP722 customers. Please use this thread for discussing your experiences and bugs with this release.

Release notes will be posted as soon as I get them.
Reading a lot of posts here gives me the impression many folks look at "TurboHD" as just new options of bundling programming options. However, "TurboHD" is actually new DISH technology for transmitting more/faster bits over existing bandwidth (it seems).

Reading the news releases at Dish's web site I see the following statement mixed in with all the hype about "Turbo packages".

TurboHD uses a cutting-edge 8PSK-Turbo code to stream more data to your satellite receiver at a faster image processing rate, which results in a superior picture and sound for all your home viewing. You won't find this technology anywhere else!

The "8PSK-Turbo code" is used on all HD channels, and in other articles Dish implies this code will also improve SD picture quality.

I have a 622 still at L5.12, so either the capability for 8PSK-Turbo was already built into the receiver or, as some have implied, we have to be updated to L6.10 for this improvement to work.

Anyone have a straight forward answer? Maybe the L6.10 release notes, when available, will address this.
See less See more
Every time E* introduces a new version of software with new features, they inadvertently manage to "break" something that used to work. If you've been a sub for a long time you know exactly what I'm referring to. While I'm certainly in favor of TURBO if it lives up to the hype, I would much prefer to see past "breakages" fixed. This includes Trick Play, improved Audio-Video Sync and Audio dropouts when using the external drive (to name a few).

I pray nothing else breaks with 6.10.
moman19 said:
Every time E* introduces a new version of software with new features, they inadvertently manage to "break" something that used to work. If you've been a sub for a long time you know exactly what I'm referring to. While I'm certainly in favor of TURBO if it lives up to the hype, I would much prefer to see past "breakages" fixed. This includes Trick Play, improved Audio-Video Sync and Audio dropouts when using the external drive (to name a few).

I pray nothing else breaks with 6.10.
I could not agree more with you. I cringe whenever I hear about a new release. The Trick Play seems to be working now, after L5.12. If you remember, this has been screwed up for many releases; not just since L5.11. I guess things have to reach a certain level before Dish addresses it.
I'll bet the phrase "it's not that bad" gets used a lot at Dish. :)
I haven't found anything "broken" as a result of L6.10 except the "Movies and more" menu selection which attempts to load the interface then gives me a smart card error message. On the guide I have multiple Channel 501's with all the Movies on Demand choices. Since I can't test the 1080p and I don't "rent" movies, my 722 was a bad choice for a "limited release"test.

It's ironic that the "Movies and more" menu choice doesn't work since the really big technology deal was VOD 1080p. But truthfully, other than the one 1080p movie choice, being Turbocharged hasn't done much of anything unless you count all those new premium channels that I get in an unreliable signal from weak transponders on 129°.

In other non-news, Comcast Sports Network (Bay Area) does have a nice picture on the Giants game today.:)
The enhanced VOD is on channel 501.
Looks like 6.10 may have started spooling for everyone overnight.

It didn't wait for my guide update; as soon as I powered off my 722, about ten seconds later the download started followed by the 6.10 install and reboot.

Same happened with my second 722.
1 - 20 of 103 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top