DBSTalk Forum banner
1 - 20 of 26 Posts

· AllStar
Joined
·
64 Posts
Discussion Starter · #1 ·
My VIP922 finally died after years of faithful service. I got the 922 the month they came out and it has been very good to me.

Saturday night while watching free cinemax weekend it just shutoff. It tried to restart but no video output and the fans kicked into high gear. Unplugged it for 20 minutes and this time it actually came on. After bout 10-15 minutes of TV it shutoff again and kicked the fans into high with no video output.

After numerous more reboots ; I finally visited DISH Tech support chat and talked to a lovely person name Rosy B. After a few minutes of troubleshooting; she determined I need a new 922. I should have it in 3-4 days.

Just wanted to thank Dish Network for making a great product (its had its buggy issues along the way; but I really do enjoy my 922 and hope the new one lasts as long as my original).

And yes I do have the home protection on the equipment through dish.

Thanks,

Sandy
 

· AllStar
Joined
·
95 Posts
Mine died last month exactly the same way. I too had the warranty and got a replacement...didn't realize there might be "options" :)
 

· AllStar
Joined
·
64 Posts
Discussion Starter · #8 ·
Well the replacement 922 is now down for the count.

In the morning for the last week when I turn on the TV; the 922 is stuck at the sling loading screen. (apparently from the nightly restart/update). I have to unplug the power cable and then it will boot after about 30 minutes of trying.

My recordings and DVR are working properly however. In the system info screen the HDD icon F: is now showing a red icon with a cross through it. I"m guessing the HDD is failing.

I love my 922; but I guess I"ll be calling dish this afternoon again.
 
Joined
·
910 Posts
Please PM your account number and verify your 4 digit PIN number on your account so I can assist you with a replacement receiver. Please let me know. Thanks.

SandyG3 said:
Well the replacement 922 is now down for the count.

In the morning for the last week when I turn on the TV; the 922 is stuck at the sling loading screen. (apparently from the nightly restart/update). I have to unplug the power cable and then it will boot after about 30 minutes of trying.

My recordings and DVR are working properly however. In the system info screen the HDD icon F: is now showing a red icon with a cross through it. I"m guessing the HDD is failing.

I love my 922; but I guess I"ll be calling dish this afternoon again.
 

· Mr. FixAnything
Joined
·
28,123 Posts
SandyG3 said:
Well the replacement 922 is now down for the count.

In the morning for the last week when I turn on the TV; the 922 is stuck at the sling loading screen. (apparently from the nightly restart/update). I have to unplug the power cable and then it will boot after about 30 minutes of trying.

My recordings and DVR are working properly however. In the system info screen the HDD icon F: is now showing a red icon with a cross through it. I"m guessing the HDD is failing.

I love my 922; but I guess I"ll be calling dish this afternoon again.
Under Couters screen you could find some info about the HDD failure, the code.
 

· New Member
Joined
·
7 Posts
Glad too here somebody feels satisfied with the performance of the 922. Hope you don't get one of the five I returned for a refurb. Had nothing but locking issues with the model. Would work fine for about two weeks than problems would start. None of my five lasted over two months total. Went back to 722, 722k. Now it's made me jumpy about trying the Hopper.
 

· Legend
Joined
·
492 Posts
Mojoe376 said:
Glad too here somebody feels satisfied with the performance of the 922. Hope you don't get one of the five I returned for a refurb. Had nothing but locking issues with the model. Would work fine for about two weeks than problems would start. None of my five lasted over two months total. Went back to 722, 722k. Now it's made me jumpy about trying the Hopper.
Boy and I thought my run was bad over 2 years!!!

And people on the forums wonder why we wanted a free hopper/sling just from all the BS you have to put up with!
 

· AllStar
Joined
·
64 Posts
Discussion Starter · #14 ·
Looked like the old receiver was showing some smart hdd errors which seemed to go hand in hand with the symptoms I was seeing (locking up; garbled recordings etc.) Replacement receiver came in last night.

Thank You again for your assistance Ray.
 

· Legend
Joined
·
336 Posts
My six week old one has been getting progressively worse over the past couple of weeks and finally went nuts over the weekend so a replacement is on the way. I will no play games with the model, if the next one goes bad as well, I will ship it back and stick to my 211 and save myself $17 a month!
 
Joined
·
910 Posts
Sandy,

You're welcome! Please let me know if I can assist you further. Thanks.

SandyG3 said:
Looked like the old receiver was showing some smart hdd errors which seemed to go hand in hand with the symptoms I was seeing (locking up; garbled recordings etc.) Replacement receiver came in last night.

Thank You again for your assistance Ray.
 

· New Member
Joined
·
1 Posts
Please I need help regarding my vip 922
I had it since 12 /2012
And it happens that when i wake up in the morning to find tv1 light IS on while reciever was on standby mode and actually i check on tv to find that reciever is still shut but the light is on ???
It happend three times so far which makes me feel it takes place when system is updating overnight
However it happened today again at 10:30 pm when reciever was also in standby mode and i was reading in the living room that the green light of tv1 is on
I turned my tv on to see if it automatically turned but it is still on standby with dish logo and the regular message to push select button to watch tv
A minute or 2 the the green light of tv1 on reciever is gone as if nothing happened
Any ideas of the cause ??
 

· Legend
Joined
·
336 Posts
Jimhawkins said:
Please I need help regarding my vip 922
I had it since 12 /2012
And it happens that when i wake up in the morning to find tv1 light IS on while reciever was on standby mode and actually i check on tv to find that reciever is still shut but the light is on ???
It happend three times so far which makes me feel it takes place when system is updating overnight
However it happened today again at 10:30 pm when reciever was also in standby mode and i was reading in the living room that the green light of tv1 is on
I turned my tv on to see if it automatically turned but it is still on standby with dish logo and the regular message to push select button to watch tv
A minute or 2 the the green light of tv1 on reciever is gone as if nothing happened
Any ideas of the cause ??
Mine will show the record led on when it is not set to record anything, it will not be recording anything, just the record light is on. Have to reboot it to get it to turn off.
 

· AllStar
Joined
·
64 Posts
Discussion Starter · #20 ·
Finally got around this weekend to setting up the new VIP922. After all the updates the box seems fairly stable and sling is working good. My only complaint is that this box is a bit louder than the other one (not sure if its fan noise or what). Just glad to have a stable box once again.
 
1 - 20 of 26 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top