DBSTalk Forum banner
1 - 9 of 9 Posts

·
New Member
Joined
·
3 Posts
Discussion Starter · #1 ·
Will the 921 work with only one tuner connected to the satellite dish? I'm in the process of running the second cable, but can't seem to get it to recognize the dish on tuner 1. I know the dish is pointed correctly since I just took my working 510 off.

Thanks in advance.
 

·
Hall Of Fame
Joined
·
4,009 Posts
Still doesn't matter. Both inputs need to be connected.
 

·
Hall Of Fame
Joined
·
3,184 Posts
bluesky9879 said:
A Dish 500 can have either a legacy or Dish Pro LNB. Do you have a Dishpro LNB? If so a Dish Pro serperator will allow the 921 to be fed from 1 cable. That's what I have on my 921 and it works fine.
 

·
New Member
Joined
·
3 Posts
Discussion Starter · #7 ·
Michael P said:
A Dish 500 can have either a legacy or Dish Pro LNB. Do you have a Dishpro LNB? If so a Dish Pro serperator will allow the 921 to be fed from 1 cable. That's what I have on my 921 and it works fine.
It has to be a DishProPlus LNB - not just DishPro to use the ProPlus Separator.
 

·
Hall Of Fame
Joined
·
3,184 Posts
bluesky9879 said:
It has to be a DishProPlus LNB - not just DishPro to use the ProPlus Separator.
Mine is a plus, however I thought the plus was that you can add additional Dish Pro LNB's without an external switch. I have a Dish Pro dual LNB aimed at 61.5 and a DPP twin on the D500.

I take it then yours is not a plus?
 

·
AllStar
Joined
·
53 Posts
I just upgraded my equipment to DishPro from Legacy and by mistake i hooked up a dead cable to my 921 and i had just one tuner working when i checked my PIP.
 
1 - 9 of 9 Posts
Top